Filter
Top Products
Page 11SKU 94515
For technical questions, please call 1-800-444-3353.
Assembling the Roof Studs and Braces
Figure D
11
11
15a
15b
Attach both Roof Studs (11) to the outside of the Crown (35) and slide one Bolt
(43) into each. Secure the ends to the outer top edge of the Side Ceiling Plates
(36) using another Bolt (43).
Slide a Left Window Support Beam (15a) onto two Roof Studs (11) on the left side
of the greenhouse, with the predrilled holes on the underside and the flat side fac-
ing the Crown (35). Use the extra Bolts (43) to secure the Beam loosely in place.
Repeat for the Right Window Support Beam (15b) on the right side.
At this time, verify that the Door Rail (14) is oriented correctly, with the rounded
edge facing up – see number 3 on page 7.
1.
2.
3.
REV 01/07