Filter
Top Products
SKU 94138 Page 3
6. Maintain tools with care. Keep tools maintained and clean for better and
safer performance. Follow instructions for maintenance and changing
accessories. The handle must be kept clean, dry, and free from oil and grease
at all times.
7. Disconnect power. Turn off tool when not in use.
8. Avoid unintentional starting. Be sure the switch is in the Off position when
not in use and before replacing battery.
9. Stay alert. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
10. Check for damaged parts. Before using this tool, any part that appears
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for any condition that may affect
proper operation. Any part that is damaged should be properly repaired or
replaced by a qualified technician. Do not use the wand if the switch does not
turn On and Off properly.
11. Guard against electric shock. Prevent body contact with grounded surfaces
such as pipes, radiators, ranges, and refrigerator enclosures.
12. Do not operate this tool if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the wand.
13. Maintenance. For your safety, service and maintenance should be performed
regularly by a qualified technician. If the wand is to be stored for an extended
period of time, remove the battery to prevent damage.
14. People with pacemakers should consult their physician(s) before using this
product. Electromagnetic fields in close proximity to a heart pacemaker could
cause interference to or failure of the pacemaker.
15. Harbor Freight Tools can not guarantee accuracy of this device.
16. Check battery strength frequently, lower battery strength can affect the
performance of this device.
NOTE: This wand is water resistant, but not water proof. If exposed to prolonged
rain or wet conditions, it is likely to be damaged. Protect this tool from exposure to
water, and wipe it off immediately if it becomes wet.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.