Filter
Top Products
SKU 92508 For technical questions, please call 1-800-444-3353. PAGE 4
15. Maintain light with care. Keep lantern clean. Properly maintained lights will work
better and more efficiently. Do not use a damaged lantern. Tag damaged lanterns and
their corresponding switches “Do not use” until repaired.
16. Check for loose mounting, breakage of parts, and any other condition that may
affect the lantern’s operation. If damaged, have the lantern serviced before use.
Many accidents are caused by poorly maintained fixtures.
SERVICE
17. Fixture service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
18. When servicing a fixture, use only identical replacement parts. Follow instruc-
tions in the
“Maintenance Instructions”
section of this manual. Use of unauthorized
parts or failure to follow maintenance instructions may create a risk of electric shock or
injury.
19. Maintain labels and nameplates on the Lantern. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
20. Only install type A bulbs rated at or below the maximum wattage (100 Watts) for
this Lantern.
21. Do not open the black box inside the Base (1). There are no user-serviceable parts
inside.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on
the last page are included. If any parts are missing or broken, please call Harbor
Freight Tools at the number shown on the cover of this manual as soon as possible.
SYMBOLOGY
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
Volts Alternating Current
Amperes
No Load Revolutions
per Minute (RPM)
A
V ~
n
o
xxxx/min.