Harbor Freight Tools 91839 Log Splitter User Manual


 
Page 7
For replacement parts, please call 1-800-444-3353.
SKUs
91839, 91840
& 92199
Operation (continued)
FIGURE 5
(9 HP Engine Shown)
Starter Cord
Throttle
Choke
WARNING!! Stand clear of the splitting area. No spectators should be within
twenty feet of the log splitting area. Wood projectiles can fly in any direction.
6. Grip the Directional Valve (58) and move
it into the lower position to move the
Slide Assembly (3) toward the log to split it.
7. Once the log is split, remove the split pieces.
To back the wedge off the log, move the
Directional Valve (58) away from the log
you just split.
FIGURE 6
Directional Handle (58)
To stop movement of the Log Splitter, move the Directional Valve (58) into
the midpoint. Do not go near the splitting area if the Slide Assembly (3) is
moving.
8. Continue repeating the above steps until all of the logs are split.
4. Place the log on the Splitter Base as shown in FIGURES 1 and 4. Make sure the wedge
on the Slide Assembly (3) is facing the log. (See FIGURE 1).
5. After reading and following all of the setup, safety, and operation warnings in the Robin
®
Operating Manual, turn on the engine. See FIGURE 5. Set the engine’s throttle all the
way to the fast setting (represented by the rabbit, left in the picture below).