Filter
Top Products
Page 6SKU 90326
FIGURE 6
FIGURE 7
FIGURE 8
Assembly (continued)
5. To install the Drain Set (#11):Set the Drain
Ring into the hole in the Sink. Hold the
Gasket and the Funnel under the Sink in
positionunder the hole. Attach them with the
screw. See FIGURES 2 and 6.
6. Attach the Elbow (#9) to the Funnel with
the Connector (#10). See FIGURE 6.
7. Attach the Pipe (#8) into the Elbow (#9)
in the bottom, and the piece of pipe coming
from the upper drain on the top.
See FIGURES 2 and 6.
Drain Ring
Funnel
Gasket
8. Set the Spout (#6) into the hole next
to the upper drain and connect it under
the Sink with the Spout Connector (#6).
Attach the Intake Coupler (#12) to the
Spout Connector (#6).
Maintenance
1. Periodically check that all of the
connections are tight.
2. Keep the drain clear of all obstructions.
Screw
9. Attach a 3/4” hose (not included) to the
threaded Water Inlet. See FIGURE 2.
Attach a 3/4” hose using hose clamps
(not included) to the Water Outlet. Route
hose to your planned location for waste
water exit.
10. Check the Sink and all the fittings for
leaks and that it properly drains. Once
you’re sure that everything is satisfactory,
the Sink is ready for use.
Note: The small tray and the washboard
tray easily set in the top of the Sink when
needed. See the cover photo.