Filter
Top Products
Page 7For technical questions, please call 1-800-444-3353.Items 41188
69513
8. Insert the Height Pin (7) through the
Vertical Post Assembly so that it goes all
the way through. Slide the R-Pin (18)
through the hole in the Height Pin to
secure the Inner Vertical Post into place.
Repeat for the second Vertical Post Assembly.
9. Tighten down all of the Nuts and Bolts and
make certain that the entire Telescoping
Gantry Crane Assembly is tight and secure.
10. With assistance, tilt the Gantry Crane
up and set it onto its base.
WARNING! More than one person is
needed for this procedure. See Figure E.
Figure E
11. Attach a Handle (8) to each Pulley (6).
See Figure F.
Handle (8)
Pulley (6)
Figure F
NOTE: Once Assembly is complete, tighten ALL Bolts before initial operation.
SAFETYOPERATIONMAINTENANCE ASSEMBLY