Filter
Top Products
Page 6 For technical questions, please call 1-800-444-3353. Items 41188
69513
3. Attach each Vertical Post Assembly to
each Base Assembly, making certain
that each Pulley Assembly (6) is to the
outside of the Crane. See Figure C.
Base
Assembly (3)
Vertical Post (1, 2)
Figure C
4. From the top, insert four Bolts (17)
through the base of the Vertical Post
Assembly and into Base Assembly.
Slip on Washer (19), Spring Washer (15)
and secure by tightening on Nuts (16).
5. Attach two Struts (5) to each Vertical
Post Assembly and Base Assembly.
Each Strut is attached to the one eyelet on
the side of the Vertical Post. See Figure D.
Strut (5)
Base
Assembly (3)
Vertical
Post
(1, 2)
Figure D
6. Insert a Frame Bolt (14) through the
top of the Strut. Slip on a Washer (19),
Spring Washer (15) and secure
with the Nut (16). Repeat for all four Struts.
7. Insert a Frame Bolt (14) through
the bottom of the Strut also.
Slip on a Washer (19), Spring Washer (15)
and secure with the Nut (16).
Repeat this also for all four Struts.
SAFETY OPERATION MAINTENANCEASSEMBLY