Filter
Top Products
Unpacking
This packaging contains sharp objects. Take care when unpacking. This machine could require
two persons to lift, assemble and move. Remove the machine, together with the accessories
supplied, from the packaging. Do not throw the packaging away, keep it safe throughout the
guarantee period then recycle if possible, otherwise dispose of it by the proper means. Do not
let children play with empty plastic bags due to the risk of suffocation.
Operation
Adjusting Fan Pattern
The angle of spray coming out of the lance may
be a
djusted by rotating the nozzle. This will vary
the spray pattern from approximately a 0° narrow
high impact stream to a 60° wide fan spray (see
figure 1).
The narrow high impact spray (see figure 2)
must be used c
autiously, as it may damage
some surfaces.
Large surface areas can be cleaned more
quickly
using a wide fan pattern (see figure 3).
Nozzle Cleaning
A clogged or partially clogged nozzle can cause
a significant reduction of water coming out of the
nozzle and cause the unit to pulsate while
spraying. To clean out the nozzle:
− Turn off and unplug unit.
− Turn off water supply. Relieve any pressure
trap
ped in the hose by squeezing trigger 2-3
times.
− Separate lance from gun.
− Rotate nozzle to the narrow stream setting.
This
opens up the fan blades.
−
Insert tip cleaner into the nozzle hole and move back and forth until debris is dislodged (see
Figure 4).
− Remove additional debris by back-flushing water through the nozzle. To do this, place end of
a gar
den hose (with water running) to end of nozzle for 30-60 seconds.
Nozzle
Tip Cleaner
Figure 4 Insert tip cleaner in nozzle hole
and move back and forth until debris is dis-
lodged
Figure 2 Narrow high impact stream
Figure 3 Wide fan pattern
Customer Careline: 0845 601 7834
6
1