Filter
Top Products
16 PNEG-1597 Sweep Tractor Assembly Instructions
3. Assembly
9. Bolt the four (4) 5/8"-11 x 6" threaded rods to the tractor frame using one (1) 5/8"-11 hex nut for
each rod.
Figure 3E
10. Place one (1) 5/8"-11 hex nut onto each rod in a temporary position. These will hold the motor
plate in place.
Figure 3F
5/8"-11 x 6" Threaded rods
5/8"-11 x 6" Threaded rods
5/8"-11 Hex nuts