Filter
Top Products
-6-
T10043 38" Lawn Sweeper
Operations
The Model T10043 can be raised or lowered to
achieve the optimal sweeping height for different
surfaces.
Adjust the position of the brushes so that they
extend approximately ½" into the grass.
To adjust the brush height:
1. Loosen the height adjustment knob, then
reposition the height adjustment lever. When
the desired height is reached, tighten the
height adjustment knob (Figure 19
).
Figure 8. Height adjustment.
13. Attach the leaf bag assembly to the sweeper
assembly using an M6 x 33 clevis pin and a
2mm hairpin cotter pin, as shown in
Figure
17. Repeat for both sides.
Figure 17. Bag attachment.
Sweeper
Assembly
Leaf Bag
Assembly
Clevis Pin
Hairpin
Cotter Pin
14. Attach the leaf bag dump rope to the leaf bag
frame, as shown in Figure 18
.
Figure 18. Rope attachment.
Leaf Bag Frame
Rope
Tips for using the Model T10043 Lawn
Sweeper:
• Empty the leaf bag after every use.
• To dump the leaf bag, pull the leaf bag dump
rope forward or lift the rear of the leaf bag.
• For best results and ease of use, be sure the
height is properly adjusted for both the sur
-
face being swept and the hitch height of the
mower.
• Follow the maintenance sc
hedule outlined
in these instructions to
prevent unnecessary
wear on your sweeper.
Height Adjustment Knob
Lock Plate
Height Adjustment Lever
Figure 19. Height Adjustment.
Make sure the leaf bag dump rope is
secured to the riding mower during use but
does not interfere with the operation of the
mower. Additionally, make sure the leaf bag
dump rope is not in a position to become
entangled in the wheels or brushes of the
sweeper. Failure to safely secure the rope
during use can damage the sweeper or
cause you to lose control of the mower.