Filter
Top Products
Work Area
TO AVOID RISK OF PERSONAL INJURY, EQUIPMENT DAMAGE, FIRE AND SHOCK, MAKE SURE YOUR
WORK AREA IS:
Free of damp, wet or rainy conditions.
Free of children (never let them handle tools or machinery).
Well-lit.
Clean and uncluttered.
Before Operating
Before using any tool, any part that appears damaged should be carefully checked to determine that it will
operate properly and perform its intended function.
Before operating your Log Splitter check for damaged parts. You should also:
Make sure all clamps, locks and bolts are tight.
Keep Guards in place and in working order.
Assembly
Your Log Splitter requires some limited assembly. Please refer to Figure 1, and to the
Assembly Diagram on page 7 and Parts List on page 6 as needed for assembly and
operation. Unpack the Log Splitter at the place that you will be using it. The Log Splitter
is heavy, so be certain to use proper lifting techniques when moving and placing the Log
Splitter.
To complete the assembly, insert each Handle (A-16) into each Socket (A-25) as shown in
Figure 1. Your Log Splitter will then be ready to operate.
Figure 1-Operating Handle Instruction
Handle (A-16)
Log Splitter Assembly
Socket (A-25)
#39981 Page 3
Rev 08l