Great Dane GSKH1848S Lawn Mower User Manual


 
Service Electrical - 29
SERVICE ELECTRICAL
• Keep original bevel (A) when grinding.
• Blade should have 0.40 mm (1/64 in.) cutting edge (B) or less.
• Balance blades before installing.
Balancing Blades
c
1. Clean blade.
c
c
c
c
c
c
c
c
c
2. Put blade on nail in a vise. Turn blade to horizontal position.
3. Check balance. If blade is not balanced, heavy end of blade will drop.
4. Grind bevel of heavy end. Do not change blade bevel.
Service Electrical
WARNING: Battery posts, terminals and related accessories contain lead
and lead components, chemicals known to the State of California to cause
cancer and reproductive harm. Wash hands after handling.
Service the Battery Safely
c
CAUTION: Avoid injury! Mower blades are sharp. Always wear
gloves when handling mower blades or working near blades.