Great Dane GDB10026 Lawn Mower User Manual


 
Service Lubrication - 13
SERVICE LUBRICATION
Service L ubrication
Grease
Use a general all-purpose grease with an NLGI grade No.2
rating.
Wet or high speed conditions may require use of a special-
use grease. Contact your Servicing dealer for information.
Spray Lubricant
Use a general-purpose petroleum-based spray lubricant.
Lubrication Points
MX18835
Grease caster wheel bearings (A).
Grease caster wheel pivot bushings (B).
Grease cutter housings (C) (two on 36-Inch mower
deck, three on 48 and 52-inch mower decks).
Grease idler arm bushings (D).
MX15287
Apply grease to three spindle bearings (E), until grease
is expelled from vent on spindle housings.
Lubricate mower deck idler pulleys (F).
NOTE: Use spray lubricant to lubricate the following
items:
Lubricate speed control lever pivot shaft (G).
Lubricate throttle control cable (H).
Lubricate choke control cable (I) if independent.
Lubricate hydro pump lower control arms on both sides
(J).
IMPORTANT: Avoid damage! If operating outside
that temperature range, contact your Servicing
dealer for a special-use grease.
B
A
J
C
D
B
F
I
H
AD
H
E