Filter
Top Products
EN - 16
To disable this feature:
1. Move transport lock knob up to the Off
position.
Height of Cut (HOC)
See Figure 6.
1. Push down on mower lift pedal, or pull
back on lift lever, to release deck
pressure from HOC index wheel.
2. If locked, move transport lock lever to
unlocked position.
3. Rotate HOC index wheel to the desired
HOC setting. Height setting is viewed in
the center window on top of the HOC
adjustment assembly.
4. Release mower lift pedal or lift lever.
Parking Brake Lever
Engage parking brake; steering levers must
lock in neutral.
Disengage parking brake; engine must not
start.
Release control lever; engine must turn off.
1. DISENGAGE
Push lever forward to
disengage brake.
2. ENGAGE
Pull lever backward to
engage brake.
Operator Platform
The operator platform has two positions:
1. Ride
Use as a stand-on mower (platform down)
2. Transport
Use as a walk-behind unit (platform up)
NOTICE: Lock platform using the transport
lock latch. See To Move the Operator
Platform on page 19.
HOUR METER
Measures and displays (1) the amount of time
engine has been run, time spent on jobs and
service intervals. This time cannot be
cleared.
Operation
Press and release the
toggle button (2) to
shift between different
functions.
Press and hold the
toggle button to reset
the timer or clear a
service message.
Figure 5
Transport
Lock Off
Transport
Lock On
Figure 6
1. Height of Cut (HOC) Index Wheel
2. Transport Lock Lever
3. HOC Setting Indicator
1
2
3
CAUTION: Avoid injury! Use
extreme care when operating unit
with operator platform in transport
position, especially when
backing. Reduce engine speed
and before moving unit.
1
2
1
2