Filter
Top Products
Trigger Safety Latch
WARNING
To reduce the risk of serious bodily injury,
including fluid injection, splashing in the eyes or
on the skin, ALWAYS engage the trigger safety
latch whenever spraying stops, even for a
moment.
In the engaged position, the trigger safety latch
prevents the gun from being triggered accidentally
by hand or if it is dropped or bumped. Be sure the
latch is pushed fully down when engaging it or it
cannot prevent the gun from being triggered. See
Figure 2.
TRIGGER SAFETY ’
LATCH SHOWN
\
\:
ENGAGED
TRIGGER SAFETY
LATCH SHOWN
DISENGAGED
Figure 2
Installing and Changing Spray Tips (1235)
WARNING
To reduce the risk of serious bodily injury,
including fluid injection or splashing in the eyes or
onto the skin, use extreme caution when changing
spray tips. ALWAYS follow the procedure below.
1. Follow the
Pressure Relief Procedure.
2. Point the gun and wand away from yourself and
anyone else.
3. Without holding your hand over the spray tip (A),
pull back the quick coupler ring (B), remove the tip
and then release the ring. See Figure 3.
4. Be sure the tip is secure before starting to spray
again.
5. Tip holding holes are provided on the chassis.
Figure 3
308-518 7