GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction
or break down, grounding provides a path of least
resistance for electric current to reduce the risk of
electric shock. This equipment is equipped with a cord
having an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances.
I DANGER
Improper connection of the equipment- grounding
conductor can result in the risk of electrocution.
Check with a qualified electrician or service
person if you are in doubt as to whether the outlet
is properly grounded. Do not modify the plug
provided with the product - if it will not fit the outlet,
have a proper outlet installed by a qualified
GROUND FAULT CIRCUIT INTERRUPTER PROTECTION (826)
The 826 pressure washer is provided with a
ground-fault circuit-interrupter (GFCI) built into the
power supply cord. This device provides additional
protection from the risk of electric shock. Should
replacement of the cord become necessary, use only
identical replacement parts that include GFCI
protection.
CAUTION
DO NOT use the switch on the GFCI cord to start
the unit. This may cause premature failure of the
GFCI.
ALWAYS
turn the machine off at the switch
before resetting the GFCI.
GROUND FAULT CIRCUIT INTERRUPTER PROTECTION (1235)
To comply with me National Electrical Code (NFPA 70)
and to provide additional protection from the risk of
electric shock, connect the 1235 pressure washer to a
receptacle that is protected by a ground-fault
circuit-interrupter (GFCI).
EXTENSION CORDS
Use only 3-wire extension cords that have 3-prong
grounding-type plugs and 3-pole cord connectors that
accept the plug from the product. Use only extension
cords that are intended for outdoor use. These
extension cords are identified by a marking “Acceptable
for use with outdoor appliances; store indoors while not
in use.” Use only extension cords having an electrical
rating not less than the rating of the product. Do not use
damaged extension cords. Examine extension cord
before using and replace if damaged. Do not abuse
extension cord and do not yank or pull on any cord to
disconnect. Keep cord away from heat and sharp
edges. Always disconnect the extension cord from the
receptacle before disconnecting the product from the
extension cord.
I- WARNING -1
To reduce the risk of electrocution, keep all
connections dry and off the ground. Do not touch
plug with wet hands.
308-517 3