Filter
Top Products
9 308-537
Installing and Changing Spray Tips (2340)
WARNING
To reduce the risk of serious bodily injury ,
including
fluid injection or splashing in the eyes or
onto the skin, use extreme caution when
changing spray tips.
ALWAYS
follow the
procedure
below
.
1.
Follow the
Pressure Relief Procedure
.
2. Point the gun and wand away from yourself and
anyone
else.
3. Without
holding your hand over the spray tip (A), pull
back
the quick coupler ring (B). Remove
the old tip
and/or install a
new one, and then release the ring.
See
Figure 3.
4. Be sure the tip is secure before starting to spray
again.
5. Tip
holding holes are provided on the chassis.
CAUTION
To avoid blowing the o–ring out of the quick
coupler, due to the high pressure in the system,
never operate the pressure washer without a tip
securely
mounted in the quick coupler
.
Figure 3
A
B