Filter
Top Products
5
•
Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
• Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work to be
performed. Use of the power tool for operations different
from intended could result in a hazardous situation.
Service
•
Have your power tool serviced by a qualified repair
personnel using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Additional safety Instructions
• This appliance is not intended fot he use by young and
infirm person unles have been adequately supervised
by a responsible person to ensure that they can use the
appliance safely. Young children should be supervised to
ensure that they do not play with thhe appliance
• Before use check the supply and extension cord of signs
of damage or aging. If the cord becomes damaged during
use, disconnect the cord from the supply immediately.
DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY. Do not use the
applance if the cord is damaged or worn.
Additional safety rules for line trimmers
• Always wear adequate protective clothing when operating
the machine to avoid injuries to face, eyes, hands, feet,
head or hearing. Use safety glasses or a face shield, high
boots or sturdy shoes, long trousers, work gloves, a hard
hat and hearing protection.
• When starting up and when the machine is in operation,
keep the cutting section away from all parts of the body,
especially the hands and feet.
• Do not start the machine when it is upside down or when
it is not in the operating position.
• Switch the motor off and pull out the plug when the
machine is not being used, left unattended, being
cleaned, being moved from one place to another or
when the spool is being changed or the length of line
manually adjusted.
• If there is an interruption to the power supply or the
extension cable is damaged, switch off the machine
immediately and remove the plug from the power point.
• Do not move the machine by pulling on the electrical
cable. Always use the handgrip.
• Do not operate the machine near people, especially
children or pets. Turn it off if they get too close. Maintain
a safe distance of at least 5m from other people when
using the machine.
• Keep a balanced and stable stance while using
the machine.
• Ensure that the area being cut is free from strings,
stones and debris.
• Do not cut against hard objects. This could cause injury
to the operator and damage to the machine.
• Never use the machine without the guard. Never use the
machine if the guard is damaged.
WARNING. The guard is vital for your and other people’s
safety and for the machine’s operating efficiency.
• Do not try to stop the cutting device (nylon line) with your
hands. Always let it come to a stop by itself.