Filter
Top Products
12
3. With the engine switched
off, lift the front of the mower
upwards so the handle bar sits
on the ground and the spark
plug faces upwards.
Note. Improper tipping may
affect engine performance.
4. Put on a pair of sturdy gloves
to protect your hands.
5. Block the rotation of the
blade and use a spanner
(not supplied) to unscrew the
blade bolt in an anti-clockwise
direction (viewed from
underneath).
6. Replace the blade and screw
in the blade bolt, tightening
it with a spanner (not supplied).
Note. When reassembling the blade, ensure the cutting
edges face in the direction of the engine rotation.
7. Return the mower to the upright position.
8. Start the engine and allow the mower to run for a few
minutes to check that the blade is properly fitted and that
there is no undue noise or vibration. Use only the blade
as recommended by the manufacturer.
For all engine maintenance information refer to the
Briggs & Stratton instruction manual.