Global Machinery Company HC1500 Lawn Mower User Manual


 
3
Double insulated
for additional protection.
Conforms to relevant standards for
electromagnetic compatibility.
Warning.
Read the user instructions carefully.
Do not run the mower over objects. They can be
thrown and cause severe injury.
Keep bystanders, especially children and pets at
a distance of greater than 5m.
Switch off and remove plug from the mains
before adjusting, cleaning or if the cord is
entangled or damaged.
Avoid injury, do not place hands or feet near the
rotating blade
Blade continues to rotate after the mower is
switched off. Wait untill all parts are stationary
before touching them.
Do not use in the rain or leave the mower
outdoors whilst it is raining.
Specifications
Voltage: 230–240V ~ 50Hz
Motor power: 1500W
No-load speed: 4300 min
-1
Cutting width: 330mm (13”)
Cutting heights (approx): 4 (12mm, 18mm,
22mm & 28mm)
Grass box capacity: 27 litres
Approximate weight: 13kg
IP Number IPX4
Sound pressure level 92db(A)
Dear Customer
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or 0800 445 721 in
New Zealand.
Introduction
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service
.
CAUTION.
Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings
.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate
.
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.
Description of symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.