Filter
Top Products
5. Switch ON the laser line
generator.
6. Adjust the rotating dial
(2) to achieve desired line
projection.
Maintenance
1. The laser line generator must be handled with care.
2. Avoid shock, vibrations and extreme heat.
3. Always store the tool indoor, switch to OFF position and
put it in its protective case.
4. Avoid dust and liquid into the tool, use damp cloth and
mild soap to clean the tool.
5. Keep the laser line generator dry and clean.
6. Check the batteries regularly to avoid deterioration.
7. No special maintenance operation is required to be
carried except the change of batteries as per description
given in this manual.
Note: This tool is not to be tampered with and should
only be repaired by a qualified Service Technician with
laser experience.
9
Troubleshooting
Problem Possible cause Solution
Faint laser line projection Weak batteries Replace batteries
Bright lighted room Use the laser enhancing glasses
Laser line is not projected Switch is not ON Check that the switch has been
pushed down
Batteries are flat Replace batteries
Laser line angle appears not to line
up with a reference point
The rotating dial has not been
positioned correctly
Adjust the rotating dial to the
correct position
Mounting surface is not on a
flat plane
Check the vials. Use the leveling
base and level the unit with the
adjusting knobs