Filter
Top Products
Part No. 48643 Genie IWP Super Series 19
Operator’s ManualSecond Edition • Fourth Printing
Outreach Option Operating
Instructions
1 Lift up on the locking bracket.
2 Rotate the handle clockwise to extend the
platform. Rotate the handle counterclockwise
to retract the platform.
3 Be sure to lock the handle.
CE models: When the outreach is extended, the
up/down function will not operate. Retract the
outreach and reposition the platform.
Power Wheel Assist Option
Operating Instructions
1 Lower the steer handle.
2 Pull and hold the function enable lever on either
side.
3 Activate the thumb rocker switch in the desired
direction of travel.
4 Release the thumb rocker switch. The machine
will continue to roll when the rocker switch is
released.
5 Release the function enable lever to stop the
machine and set the brake.
Note: The brake will hold the machine on inclines
of less than 3°.
To Move The Machine Without Power Wheel
Assist: Pull and hold the function enable lever to
release the brake.
OPERATING INSTRUCTIONS