Genie GTH-636 Utility Vehicle User Manual


 
OPERATION
PLACING A LOAD
4 - 13
WARNING
Do not sway the machine with the boom angle indicator arrow
(B) at more than 0 degrees. By doing so you could cause a roll
over hazard which may result in injury or death.
DANGER
Always apply the parking brake (C) before lifting and/or
placing a load. Failure to do so could allow the machine to roll
over which may result in injury or death.
CAUTION
Always bring the machine to a complete stop before applying
the parking brake (C). Failure to do so will damage the parking
brake disc packs, which may void the axle warranty.
Before placing a load, the frame should be leveled. This can be
done by the use of the switch labeled sway control (D) located
on the lower right hand side of the dash panel in front of the
operator.
Adjust the sway control (D) until the indicator ball on the level
gauge (E) is on the 0 degree mark.
C
B
BRAKE ON
(C) LE TT ER V I SIB L E = 3,000 LBS
(D) LETTER VISIBLE = 2,000 LBS
P/N 3-1483
0
(1.22)
METER
FEET
(6.10 )
28
(8.54)
24
(7.32)
20
4
!"#"$ &'()*"#+
455 NORTH SUPERIOR AVENUE
MACHINE ON A FIRM, LEVEL
SURFACE WITH UNDAMAGED,
PROPERLY INFLATED CALCIUM
CAPACITY IS PER ANSI B56.6
LOAD LIMITS / HORIZONTAL BOOM
(B) L E TT ER V IS I BLE = 4 ,000 LBS
OR OPTIONAL FOAM FILLED TIRES.
CHLORIDE SOLUTION FILLED TIRES
RATE D LI F T CAP A CI TI ES A RE W IT H :
LAST FULLY VISIBLE LETTER
(A) LETTER VISIBLE = 6,000 LBS
RETR AC TE D = 8 , 00 0 LB S
REAR AXLE LOCK-UP ENGAGED.
(.61 METERS) LOAD CENTER WITH
MANUFACTURER'S RECOMMENDED
STABILITY TESTS USING STANDARD
(1.22x1.22x1.22 MET ERS). LOAD
HOMOGENEOUS CUBES 4x4x4 FT.
P.O. BOX 790
PHONE 906-353-6675
FAX 906-353-7543
CAP ACITIES A T 2 4 I N C H
STANDARD FORK FRAME.
BARAGA, MICHIGAN 49908
12
(3.66 )
16
(14.64)
48
METER
FEET
(6.10 )
28
(8.54)
24
(7.32)
20
32
20
24
(7.32)
(8.54)
28
(9.76)
44
(13.42)
40
36
(10.98)
(12.20)
0
(4.88)
(4.88 )
12
(3.66)
816
(6.10)
204
(1.22)(2.44)
(4.88 )
12
(3.66)
16
(6.10)
20
SWAY
CONTROL
HEATERHEADLIGHT
LICS
RY
PUMP O FF
SWAY
CONTROL
E
D