Filter
Top Products
OPERATION
PLACING A LOAD
4 - 15
When placing a load with the Model GTH-1048
or the GTH-1056 the rear axle stabilizing cylinders
need to be taken into consideration. When the
boom reaches an angle of
60 DEGREES on the
GTH-1048 or
55 DEGREES on the GTH-1056, all
frame leveling and transmission functions are
disabled and the rear axle stabilizing cylinders
become locked. This DOES NOT affect any
boom or fork functions. To unlock the rear axle
stabilizing cylinders and enable the transmission
functions, lower the boom to a position less than
60 degrees on the GTH-1048 or 55 degrees on the
GTH-1056.
GTH-1048 & GTH-1056
,-. /!& 0-1234
55. /!& 0-5,34
60° GTH-1048
55° GTH-1056