Filter
Top Products
CONTROLS AND INSTRUMENTS
WARNING
Always ensure that the machine level indicator (D) is at zero (0)
degrees before raising the boom. Raising the boom with an
unlevel machine may cause the machine to overturn, resulting
in injury or death.
WARNING
Use the frame sway control to level the machine only when the
boom angle indicator is at 0 degrees or less. Using the frame
sway control when the angle indicator is more than 0 degrees
may cause the machine to overturn, resulting in injury or death.
SWAY
CONTROL
PUMP OFF
BRAKE ON
(C) LETTER VISIBLE = 3,000 LBS
(D) LETTER VISIBLE = 2,000 LBS
P/N 3-1483
0
(1.22)
METER
FEET
(6.10)
28
(8.54)
24
(7.32)
20
4
455 NORTH SUPERIOR AVENUE
MACHINE ON A FIRM, LEVEL
SURFACE WITH UNDAMAGE D,
PRO PE R LY I NF LATED CA LC IU M
CAPACITY IS PER ANS I B56.6
LOAD LIMITS / HORIZONTAL BOOM
(B) LETTER V ISIBLE = 4,000 LBS
OR OPTIONA L FOAM FILLED TIRES.
CHLORID E SOLUTION FILLED TIRES
RATED LIFT CAPACITIES ARE WITH :
LAST FULLY VISIBLE LETTER
(A) LETTER VISIBLE = 6,000 LBS
RETRACTED = 8,000 LBS
REAR A X LE LOC K - UP EN G A GE D.
(.61 METERS) LOAD CENTER WITH
MANUFACTUR ER 'S RE COMME NDED
STABILITY TE STS USING STANDARD
(1.22x1.22x1.22 METERS). LOAD
HOMOGENEOUS CUBES 4x4x4 FT.
P.O. BOX 7 90
PHONE 906-353-6675
FAX 906-353-7543
CAPACITIES AT 24 INCH
STANDARD FOR K FRAME.
BARAGA, MICHIGAN 49908
12
(3.66)
16
(14.64)
48
METER
FEET
(6.10)
28
(8.54)
24
(7.32)
20
32
20
24
(7.32)
(8.54)
28
(9.76)
44
(13.42)
40
36
(10.98)
(12.20)
0
(4.88)
(4.88)
12
(3.66)
8
16
(6.10)
20
4
(1.22 )(2.4 4)
(4.88)
12
(3.66)
16
(6.10)
20
HEATERHEADLIGHT
LEFT
STABILIZER
RIGHT
STABILIZER
BLIN
ENGINE
SWAY
CONTROL
The frame sway control (C) is located on the dash panel. The
frame sway control is used in conjunction with the machine
level indicator (D) located in the center of the cross support
that the interior rear view mirror is mounted on. The sway
control switch is either toggled to the left or right depending
on the particular requirement.
FRAME SWAY CONTROL
C
D
3 - 7