Filter
Top Products
32 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 Part No. 82828
Operator's Manual Second Edition • Third Printing
GS-4390
Height, working maximum 15.1 m
Height, platform maximum 13.1 m
Height, stowed maximum 2.9 m
Rails up
Height, stowed maximum 2.9 m
Rails lowered
Width, standard tires 2.3 m
Width, high-flotation tires 2.6 m
Length, platform retracted 3.9 m
Models with one extension deck
Length, platform extended 5.4 m
Models with one extension deck
Length, platform retracted 3.9 m
Models with two extension decks
Length, platform extended 6.6 m
Models with two extension decks
Length, platform retracted 4.9 m
Models with outriggers
Models with two super decks
Length, platform extended 7.4 m
Models with two super decks
Maximum load capacity 680 - 1286 kg
All models except the model listed below
(machines with capacity indicator)
Maximum load capacity 816 - 1421 kg
GS-4390 with extra capacity option
(machines with capacity indicator)
Maximum load capacity 680 kg
All models except the model listed below
(machines without capacity indicator)
Maximum load capacity 816 kg
GS-4390 with extra capacity option
(machines without capacity indicator)
Wheelbase 2.9 m
Turning radius (outside) 5.3 m
Turning radius (inside) 2.2 m
Ground clearance 36 cm
Weight See Serial Label
(Machine weights vary with option configurations)
Gradeability 50%
Airborne noise emissions 80 dB
Maximum sound level at normal operating workstations
(A-weighted)
Controls Proportional
AC outlet in platform standard
Maximum hydraulic pressure 241.3 bar
(functions)
Tire size - standard tires 12 x 21.5
Tire size - high flotation tires 33/16LL500, 10 ply
Platform dimensions
Platform length x width 3.8 x 1.8 m
Platform extension length 1.5 m
Drive speeds
Stowed, maximum 8 km/h
Platform raised, maximum 1.1 km/h
12.2 m/39 sec
Floor Loading Information
GVW+Rated Load 6616 kg
Axle load, maximum 4082 kg
Wheel load, maximum 2041 kg
Outrigger load, maximum 2041 kg
Localized pressure per tire 8.8 kg/cm
2
862 kPa
Occupied pressure 7.2 kPa
Note: Floor loading information is approximate and
does not incorporate different option configurations.
It should be used only with adequate safety factors.
SPECIFICATIONS
Continuous improvement of our products is a Genie policy.
Product specifications are subject to change without notice or obligation.