Filter
Top Products
24 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 Part No. 82828
Operator's Manual Second Edition • Third Printing
OPERATING INSTRUCTIONS
Operation From Ground with
Controller
Maintain safe distances between operator, machine
and fixed objects.
Be aware of the direction the machine will travel
when using the controller.
Outrigger Operation
(if equipped)
1 Position the machine below the desired work
area.
Note: The engine must be running for the outriggers
to operate.
2 Push and hold the auto level
button.
3 Activate the up/down rocker switch in the down
direction. The outriggers will extend and level
the machine. A beep will sound when the
machine is level.
The indicator light on the lift function
enable button will turn red when one but
not all outriggers are down. All drive and
lift functions are disabled.
The light turns green on the lift function enable
button and on the individual outrigger buttons when
all the outriggers are in firm contact with the
ground.
The drive function is disabled while the outriggers
are down.
To control individual outriggers
1 Push and hold one or more outrigger buttons.
2 Activate the outrigger up/down rocker switch in
the desired direction to level the machine.
Fall Protection
Personal fall protection equipment (PFPE) is not
required when operating this machine. If PFPE is
required by job site or employer rules, the following
shall apply:
All PFPE must comply with applicable
governmental regulations and must be inspected
and used in accordance with the manufacturer’s
instructions.
After Each Use
1 Select a safe parking location—firm level
surface, clear of obstructions and traffic.
2 Lower the platform.
3 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
4 Chock the wheels.