Filter
Top Products
Part No. 82784 Genie GS-2032 and Genie GS-2632 23
Operator's Manual
Second Edition • Second Printing
OPERATING INSTRUCTIONS
To Position Platform
1 Press the lift function select button.
2 Press and hold the function enable switch on the
control handle.
3 Move the control handle according to the
markings on the control panel.
When lowering the platform, the platform should
stop when it is 2.1 m from the ground. Be sure the
area below the platform is clear of personnel and
obstructions before continuing. To continue
lowering, release the control handle, wait 5
seconds, then move the control handle again.
To Steer
1 Press the drive function select button.
2 Press and hold the function enable switch on the
control handle.
3 Turn the steer wheels with the thumb rocker
switch located on the top of the control handle.
Emergency Stop
Push in the red Emergency Stop button to the off
position at the ground controls or the platform
controls to stop all functions.
Repair any function that operates when either red
Emergency Stop button is pushed in.
Auxiliary Lowering/Manual
Lowering
1 Activate the auxiliary lowering/manual lowering
function. Move the toggle switch OR pull the
knob OR push the button.
Operation From Ground
1 Turn the key switch to ground control.
2 Pull out both ground and platform red
Emergency Stop buttons to the on position.
3 Be sure the battery pack is connected before
operating the machine.
To Position Platform
1 Move the up/down toggle switch according to
the markings on the control panel.
Drive and steer functions are not available from
the ground controls.
Operation From Platform
1 Turn the key switch to platform control.
2 Pull out the ground and platform red Emergency
Stop buttons to the on position.
3 Be sure the battery pack is connected before
operating the machine.