Filter
Top Products
ADJUSTMENT & MAINTENANCE
CLEANING YOUR BRUSH MOWER
To preserve life of paint and decals, wash the brush mower after each use. The
preservation of your brush mower’s decals is essential to safety, so make sure they
are kept in good condition. It is also recommended that some sort of degreasing
solution be used on all bearings.
ADJUSTMENT & MAINTENANCE 6
Kubota strongly recommends
dealers order one starter pack of knives to
be shipped with every K4080 brush mower.
• Check for excessive grease in bearing areas. Clean off any excessive amount.
• Clean clippings from hydraulic hose areas, mounting areas or any areas that may be
susceptible to excessive heat.
• Clean inside the brush mower with a pressure washer. Make sure the inside of the
mower is kept free from mud and compact grass. Keep in mind that mud built up on
the cutter drum can cause imbalance resulting in vibration.
• Preserve damaged decals or replace them if they are unreadable. Decal kits can be
obtained from your local Kubota dealer.
• Inspect blades for small cracks across the hole and insure they are wearing evenly.
• Inspect attachment hardware such as bolts and roll pins to make sure they are tight.