Filter
Top Products
TRANSPORT
TRANSPORT 13
ATTENTION
Allow all movements to stop before leaving the operator’s position to lubricate or clean
the machine. Before working on or underneath the brush mower, place blocks on both
sides of the operating vehicle tires or treads and under each end of the mower to pre-
vent accidental lowering of the machine. Remove the ignition key from the operating
vehicle and allow all movements to stop before beginning work. To transport, disen-
gage auxiliary hydraulics and lower the machine to a reasonable ride height.
Removal
1. Lower the brush mower all the way onto level ground, extend boom and stick to
reach hoses.
2. Turn off the excavator and cycle all controls to insure all hydraulic pressure is re-
lieved.
3. Unlock the locking devices on the excavator mount, never stand on the attachment.
4. Unlock mounting devices at the excavator and uncouple hydraulic hoses.
5. Re start and lift the excavator boom to remove it from the mower.
6. If transporting excavator and brush mower, leave the shredder mounted and curl
forwards so that the underside is exposed to the operator as shown above.
Storage
1. Clean the brush mower thoroughly.
2. Lubricate the mower as recommended.
3. Check hoses and replace if damaged.
4. Check for worn parts and replace so you will be ready to operate when necessary.
5. Store in a clean, dry place.