Filter
Top Products
1 026915 2 NIPPLE CLOSE 3/4 X 1.375
2 075580 1 FLANGE FUEL INLET
3 0F6390B 1 REGULATOR ASSY 2.4L
4 039253 2 SCREW HHC M8-1.25 X 20 G8.8
5 022145 2 WASHER FLAT 5/16-M8 ZINC
6 022129 2 WASHER LOCK M8-5/16
7 045771 2 NUT HEX M8-1.25 G8 CLEAR ZINC
8 0G0180 1 (REF) GASKET- THROTTLE BODY
9 0E8286 1 STREET EL 45D 1/2 NPT BRASS
10 026812 2 ELBOW 90D 3/4 NPT
11 0F8379 1 NIPPLE PIPE 3/4 NPT X 7
12 0F3869 1 (REF) SWITCH, PRESSURE GAS 5" RISE (INCLUDED WITH I/N 3)
13 057823 4 CLAMP HOSE #10 .56 - 1.06
14 059057 1 HOSE 3/4 ID SAE-30R2 (30.0” LG)
15 044118 1 BARBED STR 1/2NPT X 5/8
16 0D1509 1 DECAL INLET PRESSURE
17 * 050279 1 DECAL FUEL INLET NG (NATURAL GAS APPLICATION)
050280 1 DECAL FUEL INLET LPG (LP VAPOR APPLICATION)
18 0F9723 1 (REF) INTAKE ADAPTER MACHINED
19 0E6586 1 GASKET BOSCH 32
20 0E4394 1 ACTUATOR BOSCH 40 GOVERNOR (45KW)
0E4395 1 ACTUATOR BOSCH 32 GOVERNOR (35KW)
21 040105 1 HOSE COOL 2IN ID 20R4 (45KW)
057753B 1 HOSE 1.5 ID X 2 LG 20R4 (35KW)
22 0E6382B 1 VENTURI HOLDER W/40MM ACTUATOR (45KW)
0E6382C 1 VENTURI HOLDER W/32MM ACTUATOR (35KW)
23 0F7790E 1 VENTURI THROTTLE 26MM
24 0E7121 1 O-RING 47.625 ID X 2.38 WIDTH
25 040976 4 (REF) SCREW SHC M8-1.25 X 20 G12.9
26 022097 4 WASHER LOCK M6-1/4
27 051751 4 SCREW HHC M6-1.0 X 50 G8.8
28 035685 2 CLAMP HOSE #28 1.32-2.25
29 0F6155 1 HARNESS, CPL FUEL JUMPER
30 047290 1 HOSE 3/8 ID SINGLE BRAID (10.0”LG)
31 030340 1 HOSE 1/4 ID SAE 30R7 (22”LG)
32 042574 1 (REF) ADAPTOR 1/8NPTF TO 1/8BSPT
33 028414 1 (REF) BARBED STR 1/8NPT X 1/4
34 040173 2 CLAMP HOSE #5.5 .62-.62
35 0F2119 1 O-RING 45.63 ID X 2.62 WIDTH
NOTES:
1.
REGULATOR (I/N 3) AS SHOWN IN ILLUSTRATION IS SET UP FOR
NATURAL GAS APPLICATION.
2.
TO CONFIGURE REGULATOR FOR LP VAPOR, SWITCH HOSE BARB,
HOSE CLAMP (I/N 13) AND HOSE (I/N 14) FROM “OUT-1” TO “OUT-2”.
REPLACE PIPE PLUG FROM “OUT-2” TO “OUT-1”. USE PIPE SEALANT
ON HOSE BARB AND PIPE PLUG. MAKE SURE TO KEEP PORTS FREE
FROM DEBRIS DURING RECONFIGURATION PROCESS.
3*. FOR LP VAPOR APPLICATION SUBSTITUE LPG FUEL INLET DECAL P/N
050280 FOR NG FUEL INLET DECAL P/N 050279 (ITEM17).
4 . WHEN SWITCHING FUEL TYPES, THE PROPER DIP SWITCH SITTINGS
MUST BE MADE TO THE CONTROL PANEL. SEE OWNERS MANUAL, FUEL
SECTION FOR MORE DETAILS.