Filter
Top Products
5 of 9
25 • 30 • 45 • 60 kW available accessories
Guardian
®
Series
Model # Product Description
006175-0 - 25 & 30 kW
005630-0 - 45 & 60 kW
Cold Weather Kit
If the temperature regularly falls below 32 °F (0 °C), install a cold weather kit
to maintain optimal battery temperature. Kit consists of battery warmer with
thermostat built into the wrap.
006174-0 - 25 & 30 kW
005616-0 - 45 & 60 kW
Extreme Cold Weather Kit
Recommended where the temperature regularly falls below 32 °F (0 °C) for
extended periods of time. For liquid cooled units only.
005621-0
Auxiliary Transfer Switch
Contact Kit
The auxiliary transfer switch contact kit allows the transfer switch to lock out
a single large electrical load you may not need. Not compatible with 60kW
models.
005651-0 Base Plug Kit Add base plugs to the base of the generator to keep out debris.
005703-0 - Bisque
005704-0 - Gray
Paint Kit*
If the generator enclosure is scratched or damaged, it is important to touch-up
the paint to protect from future corrosion. The paint kit includes the necessary
paint to properly maintain or touch-up a generator enclosure.
006176-0 - 25 & 30 kW
006172-0 - 45 kW
006171-0 - 60 kW
Scheduled Maintenance Kit
The Liquid-Cooled Scheduled Maintenance Kits offer all the hardware necessary
to perform complete maintenance on Generac liquid-cooled generators.
005928-0 Wireless Remote
Completely wireless and battery powered, Generac's wireless remote monitor
provides you with instant status information without ever leaving the house.
005951-0 Advanced Wireless Remote
Remotely control generator functions with the advanced model’s LCD display.
In addition to remote testing of the generator, set the exercise cycle and
maintenance interval reminders.
006199-0 PMM Starter Kit
The PMM Starter Kit consists of a 24 VAC, field installed transformer that
enables the use of the 24 VAC Power Management Modules (PMMs) and one
PMM. The standard controller (without starter kit) can control two HVAC loads
with no additional hardware. Not compatible with pre-wired switches.
006186-0
Power Management
Module (50 Amps)
Power Management Modules are used in conjunction with the Smart Switch
to increase its power management capabilities. It gives the Smart Switch
additional power management flexibility not found in any other transfer switch.
Not compatible with pre-wired switches. Note: PMM Starter Kit required.
006463-0 Mobile Link™
Generac's Mobile Link allows you to check the status of your generator from
anywhere that you have access to an Internet connection from a PC or with any
smart device. You will even be notified when a change in the generator’s status
occurs via e-mail or text message. Note: Harness Adapter Kit required.
006478-0 Harness Adapter Kit
The Harness Adapter Kit is required to make liquid-cooled units compatible with
Mobile Link™.
* Note: Bisque kits are used in conjunction with steel enclosures. Gray kits are used in conjunction with aluminum enclosures (available on 60kW units only).