Filter
Top Products
5 of 9
22 • 27 • 36 • 48 kW available accessories
Quietsource
®
Series
Model # Product Description
005630-0 - 22, 27 & 36 kW
005632-0 - 48 kW
Cold Weather Kit
If the temperature regularly falls below 32 °F (0 °C), install a cold weather
kit to maintain optimal battery temperature. Kit consists of battery warmer
with thermostat built into the wrap.
005616-0 - 22, 27 &36 kW
006204-0 - 48 kW
Extreme Cold Weather Kit
Recommended where the temperature regularly falls below 32 °F (0 °C) for
extended periods of time. For liquid cooled units only.
005621-0
Auxiliary Transfer Switch
Contact Kit
The auxiliary transfer switch contact kit allows the transfer switch to lock
out a single large electrical load you may not need.
005651-0 Base Plug Kit Add base plugs to the base of the generator to keep out debris.
005704-0 Paint Kit
If the generator enclosure is scratched or damaged, it is important to touch-
up the paint to protect from future corrosion. The paint kit includes the
necessary paint to properly maintain or touch-up a generator enclosure.
005656-0 - 22 & 27 kW
005984-0 - 36 kW
006205-0 - 48 kW
Scheduled Maintenance Kit
The Liquid-Cooled Scheduled Maintenance Kits offer all the hardware
necessary to perform complete maintenance on Generac liquid-cooled
generators.
005928-0 Wireless Remote
Completely wireless and battery powered, Generac's wireless remote
monitor provides you with instant status information without ever leaving
the house.
005951-0 Advanced Wireless Remote
Remotely control generator functions with the advanced model's LCD
display. In addition to remote testing of the generator, set the exercise cycle
and maintenance interval reminders.
006199-0 PMM Starter Kit
The PMM Starter Kit consists of a 24 VAC, field installed transformer that
enables the use of the 24 VAC Power Management Modules (PMMs) and
one PMM. The standard controller (without starter kit) can control two
HVAC loads with no additional hardware. Not compatible with pre-wired
switches.
006186-0
Power Management
Module (50 Amps)
Power Management Modules are used in conjunction with the Smart Switch
to increase its power management capabilities. It gives the Smart Switch
additional power management flexibility not found in any other transfer
switch. Not compatible with pre-wired switches. Note: PMM Starter Kit
required.
006463-0 Mobile Link™
Generac's Mobile Link allows you to check the status of your generator
from anywhere that you have access to an Internet connection from a
PC or with any smart device. You will even be notified when a change in
the generator’s status occurs via e-mail or text message. Note: Harness
Adapter Kit required.
006478-0 Harness Adapter Kit
The Harness Adapter Kit is required to make liquid-cooled units compatible
with Mobile Link™.