Filter
Top Products
Generac
®
Power Systems, Inc. 21
Section 4 — Maintenance
Air-cooled 8.5 kW Generator
4.13 SERVICE SCHEDULE
ATTENTION: It is recommended that all service work
be performed by your nearest Generac Authorized Dealer.
SYSTEM/COMPONENT PROCEDURE FREQUENCY
X = Action Inspect Change Clean W = Weekly
R = Replace as Necessary M = Monthly
* = Notify Dealer Y = Yearly
if Repair is Needed.
FUEL
Fuel lines and connections* XM
LUBRICATION
Oil level XM
Oil X AFTER BREAK-IN
AND Y
Oil filter X AFTER BREAK-IN
AND Y
COOLING
Enclosure louvers XXW
BATTERY
Remove corrosion, XXM
ensure dryness
Clean and tighten
XXM
battery terminals
Check charge state X R EVERY 6 M
Electrolyte level X R EVERY 6 M
(unsealed batteries only)*
ENGINE AND MOUNTING
Air cleaner XR Y
Spark plug(s) XR Y
GENERAL CONDITION
Vibration, Noise, Leakage, XM
Temperature*
COMPLETE TUNE-UP* TO BE COMPLETED BY A GENERAC Y
AUTHORIZED DEALER