Generac 005308-0 Portable Generator User Manual


 
5
1.2.3 BATTERY CONNECTION
The battery shipped with the generator has been provided fully
charged. Caution must be taken when connecting the battery.
• Cut the tie wrap cable holding the RED and BLACK battery
cables to the stator.
Connect the RED battery cable to the battery Positive terminal
(+). After making sure that the connection is tight, slip the
rubber boot over the terminal connection.
Connect the BLACK battery cable to the battery Negative
terminal (–). Make sure the connection is tight.
Double check all connections to ensure they are in the correct
location and secure. See
Figure 3
at right.
Figure 3 - Battery Connections
Section 1 - General Information
Residential Portable Generator System
Negative
Cable
Positive
Cable
Figure 2 - Handle Assembly