Filter
Top Products
6
How to Connect the GefenToolBox 1:4 Splitter for HDMI
1. Use the supplied HDMI cable to connect the source device to the HDMI input
port of the GefenToolBox 1:4 Splitter for HDMI.
2. Use additional user-supplied HDMI cables to connect up to 4 HDMI-
compliant displays to the output ports on the 1:4 Switcher for HDMI.
3. Connect the included 5V DC power supply to the power receptacle on the
Splitter.
4. Connect the other end of the power supply to an available power outlet.
How to Operate the GefenToolBox 1:4 Splitter for HDMI
The GefenToolBox 1:4 Splitter for HDMI does not require any confi guration
to begin splitting the incoming HDMI input signal. However, depending on the
features required by the user, the EDID Mode and Audio Channel Selection
switches may need to be adjusted. See the following section for more
information on the usage of these switches.
Wiring Diagram for the GefenToolBox 1:4 Splitter for HDMI
CONNECTING AND OPERATING
THE GEFENTOOLBOX 1:4 SPLITTER FOR HDMI