Filter
Top Products
5
1 HDMI Output Ports 1-4
Connect HDMI-compliant display device(s) to any of these output ports.
2 Audio Channel Selection Switch
This switch will modify the EDID to specify the number of supported audio
channels when using the INTERNAL EDID mode. This setting will not affect the
EDID information when using the EXTERNAL EDID mode.
3 EDID Mode Selection Switch
This switch will control the location of the EDID that will be sent to the source
device. The options are EXTERNAL and INTERNAL. Please see pages 7-11 for
more information.
4 USB Service Port
Mini-USB service port used for upgrading the fi rmware.
5 Locking HDMI Port
Connect an HDMI source device to this port. The signal from this port will be
replicated to all HDMI output ports. Please see the Features section on page 3
for supported HDMI 1.3 features.
6 5V DC Locking Power Receptacle
Connect the included 5V DC locking power supply between this receptacle and
a power source. Only use the power supply supplied with this unit. Screw the
locking power tip into the socket on the Splitter until it fi ts snugly.
7 Power Indicator LED
This LED will become active once the included 5V DC locking power supply has
been properly connected to the unit and a power source.
PANEL DESCRIPTIONS