Filter
Top Products
➊
➑
➐
➏
➎
➍
➌
➋
➊
Starboard line
➋
Return line
➌
Port line
➍
Shadow Drive
➎
Helm
➏
Power assist module
➐
Pump
➑
Steering cylinder
• An unbalanced cylinder requires an unbalanced valve on the
pump.
• The pump must be located within 19 in. (0.5 m) of the ECU.
• The cables that connect the pump to the ECU cannot be
extended.
• The pump should be mounted horizontally, if possible.
• If the pump cannot be mounted pump horizontally, it must be
mounted vertically with the pump head connectors facing up.
• The pump must be in a location to which you can extend the
hydraulic steering lines of the boat.
• Removal of the power assist module may be necessary to
gain access to the ttings, hoses, and bleed-tee tting.
• The pump must be installed between the cylinder and the
power assist module.
© 2011 Garmin Ltd. or its subsidiaries
Garmin International, Inc.
1200 East 151
st
Street, Olathe, Kansas 66062, USA
Garmin (Europe) Ltd.
Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK
Garmin Corporation
No. 68, Zhangshu 2
nd
Road, Xizhi Dist., New Taipei City, 221, Taiwan (R.O.C.)
www.garmin.com
March 2011 190-01332-02 Rev. A Printed in Taiwan