Gardena 640 Trimmer User Manual


 
10
GB
Intended purpose
Compliance with the
operating instructions
Attention
GARDENA Electric Hedge Trimmer
EHT 410 / 480 / 550 / 640 vario
Welcome to the Garden of GARDENA ...
Please read these operating instructions carefully and observe
the notes given.
Use the instructions to familiarise yourself with the equipment,
the operating controls, their correct use, and the notes on safety.
For safety reasons, children under 16 as well as persons not
familiar with these operating instructions should not use this
Hedge Trimmer.
Keep these operating instructions in a safe place.
Where to Use Your Hedge Trimmer
The GARDENA Hedge Trimmers are designed for cutting hedges
in domestic gardens and allotments.
Compliance with the instructions provided by the manufacturer
is a prerequisite for using the tool correctly.
The operating instructions also include the conditions for opera-
tion, repair and maintenance.
A Attention! Because of the danger of physical injuries, this tool
must not be used for cutting lawns / grass verges, or for cutting
in the sense of shredding for composting.
Summary of Operating Instructions for Your Hedge Trimmer
Attaching the Guide Handle
Position the guide handle on the unit and secure in place with
the two Phillips screws.
(The screws are integrated in the drilled holes of the handle and
cannot be lost.)
Attach the guide handle. Set the appropriate working
position and use the cable
lock. Plug the mains plug
into the socket.
Hold the guide handle in
one hand and with the other
hand turn the turning switch
to the left or right as far as
it will go and begin cutting.