Gardena 48 Trimmer User Manual


 
18
GB
10. Service / Warranty
GARDENA guarantees this product for 2 years (from date of
purchase). This guarantee covers all serious defects of the unit
that can be proved to be material or manufacturing faults. Under
warranty we will either replace the unit or repair it free of charge
if the following conditions apply:
The unit must have been handled properly and in keeping
with the requirements of the operating instructions.
Neither the purchaser nor a non-authorised third party have
attempted to repair the unit.
The blade and eccentric drive are wearing parts and are not
covered by the guarantee.
This manufacturer’s guarantee does not affect the user’s existing
warranty claims against the dealer /seller.
If a fault occurs with your hedge trimmer, please return the
faulty unit together with the receipt and a description of the
fault, with postage paid to the address of the Service Centre
at the back of these operating instructions.
9. Technical Data
HighCut 48 (Art. 8880)
Power consumption, motor 550 W
Voltage /Frequency 230 V/ 50
-
60 Hz
Strokes 2,800/min.
Length of cutter blade 48 cm
Tooth gap of cutter blade 27 mm
Range of extension of
telescopic tube 0 – 62 cm
Weight with blade 5.5 kg
Workplace related
sound pressure level L
pA
1)
83 dB (A)
Uncertainty K
pA
3 dB (A)
Noise emission value L
WA
2)
measured 94 dB (A) /
guaranteed 96 dB (A)
Hand / arm vibration a
vhw
1)
< 2.5 m/s
2
Measuring process complying with
1)
EN 774
2)
EU-directive 2000/14/EC. The stated vibration emission value has been measured
according to a standardised test procedure and can be used for comparison of one electric power tool with another. It can also be used
for preliminary evaluation of exposure. The vibration emission value can vary during actual use of the electric power tool.