Filter
Top Products
14
GB
Fitting the hand guard:
Connecting the Hedge
Trimmer:
3. Assembly
Before the hand guard
5
can be
fitted, the position of the hedge
trimmer has to be changed – from
the packing position A to the
working position C.
A Hold down the button
1
and tilt
the swivel head
2
by 90°
(see 4. Operation
“Tilting the
swivel head”
).
B Hold down the button
3
and
rotate the cutting unit
4
to the
0° position (see 4. Operation
“Rotating the cutting unit by 90°”
).
C Hold down the button
1
and tilt
the swivel head
2
to 0°.
v Push the hand guard
5
onto the
swivel head
2
until the snap-on
fittings engage.
4. Operation
DANGER ! Risk of physical injury!
A
V Slide the protective cover
6
over the cutter
blade
7
.
V First insert the Hedge Trimmer plug into the
coupling of the extension cable, then plug the
extension cable
9
into a mains socket.
V Never take hold of the protective cover
6
when
connecting the hedge trimmer.
DANGER ! Risk of electric shock!
A
To avoid damage to the the mains cord
8
the
extension cable
9
must be inserted into the
cable lock
0
.
V Always insert the extension cable
9
into the
cable lock
0
.
1. Loop the extension cable
9
,
insert the loop into the cable
lock
0
and pull tight.
2. Insert the plug of the mains cord
8
into the socket of the
extension cable
9
.
3. Plug the extension cable
9
into a 230V mains power supply.
A
B
C
7
6
8
90
3
4
5
1
2