Filter
Top Products
GB
16
1. Lift safety flap .
2. Make sure the discharge chute is clean and free from debris .
3. Locate fully assembled grassbox onto 2 location points at the rear
of the deck.
4. Locate safety flap onto the top of the grassbox. Ensure the
grassbox is securely located.
• Removal is the reverse procedure.
30
29
28
Fitting fully assembled
grassbox to lawnmower
28
29
30
IMPORTANT !
AFTER FITTING ENSURE NO GAP REMAINS BETWEEN THE
SAFETY FLAP AND THE GRASSBOX.
For larger areas of grass where grass collection is not required you can
use your lawnmower without the grassbox. Ensure the Safety Flap is
fully closed. The design of the safety flap permits the cut grass to be
discharged downward behind the machine.
4. Function
The mowing time depends on the
height and moisture of the grass and
the charge of the battery.
➔
Mow twice a week during the growing
season, your lawn will suffer if more
than a third of its length is cut at one
time.
5. Initial Operation
Before using for the first time, the battery must be fully charged.
The lithium-ion battery can be charged in any state of charge,
and the charging process can be interrupted at any time without
harming the battery (no memory effect).
Your product can be used to cut grass using the following
methods:-
Grassbox Fitted :- grass is collected effectively and compacted
into the grassbox.
Mulch Plug Fitted :- grass cuttings are finely chopped to return
nutrients to your lawn.
Rear Discharge :- Effectively cuts long grass with no need to
empty the grassbox.
33
32
31
Do Not Overload Your Mower
Mowing long thick grass may cause the motor speed to drop, you
will hear a change in the motor sound. If the motor speed drops
you may overload your lawnmower which may cause damage.
When mowing in long thick grass a first cut with the cutting height
set higher will help reduce the load. See Cutting Height Adjustment.
31
33
32
WARNING !
Overvoltage damages batteries and the battery
charger.
➔ Ensure the correct mains voltage.
Charging the battery