Filter
Top Products
Safety cont’
f) Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Use of the
power tool for operations different from those
intended could result in a hazardous situation.
5. Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the
power tool is maintained.
Hedge trimmer safety warnings:
• Keep all parts of the body away from the cutter blade.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is off
when clearing jammed material.
A moment of
inattention while operating the hedge trimmer may
result in serious personal injury.
• Carry the hedge trimmer by the handle with the cutter
blade stopped. When transporting or storing the
hedge trimmer always fit the cutting device cover.
Proper handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
• Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring or its own cord.
Cutter blades contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
• Keep cable away from the cutting area.
During
operation the cable may be hidden in shrubs and can
be accidentally cut by the blade.
Additional Safety Recommendations
Work area safety
1. Never allow children or people unfamiliar with these
instructions to use the hedge trimmer. Local
regulations may restrict the age of the operator.
2. Only use the hedge trimmer in the manner and for
the functions described in these instructions.
3. The operator or user is responsible for accidents or
hazards occurring to other people or their property.
Electrical safety
1. The British Standards Institute recommend the use of
a Residual Current Device (R.C.D.) with a tripping
current of not more than 30mA. Even with a R.C.D.
installed 100% safety cannot be guaranteed and safe
working practice must be followed at all times. Check
your R.C.D. every time you use it.
2. Before use, examine cable for damage, replace it if
there are signs of damage or ageing.
3. Do not use the hedge trimmer if the electric cables
are damaged or worn.
4. Immediately disconnect from the mains electricity
supply if the cable is cut, or the insulation is
damaged. Do not touch the electric cable until the
electrical supply is disconnected. Do not repair a cut
or damaged cable, replace it with a new one. If
replacement of the cable is necessary, this must only
be done by an Approved Service Centre in order to
avoid a safety hazard.
5. Your electric cable must be untangled, tangled cables
can overheat and reduce the efficiency of your hedge
trimmer.
6. Always switch off at the mains before disconnecting
any plug, cable connector or extension cable.
7. Switch off, remove plug from mains and examine
electric supply cable for damage or ageing before
winding cable for storage.
8. Always wind cable carefully, avoiding kinking.
9. Use only on AC mains supply voltage shown on the
product rating label.
10.Our products are double insulated to EN60745.
Under no circumstances should an earth be
connected to any part of the product.
Personal safety
1. Always wear suitable clothing, gloves, and stout
shoes.
2. Thoroughly inspect the area where the hedge
trimmer is to be used and remove all wires and other
foreign objects.
3. Before using the machine and after any impact,
check for signs of wear or damage and repair as
necessary.
4. Always ensure the hand guard supplied is fitted
before using the hedge trimmer. Never attempt to
use an incomplete hedge trimmer or one with an
unauthorised modification.
Power tool use and care
1. Know how to stop the hedge trimmer quickly in an
emergency.
2. Never hold the hedge trimmer by the guard.
3. Never operate the hedge trimmer with damaged
guards or without guards in place.
4. Do not use stepladders whilst operating the hedge
trimmer.
5. Remove the plug from the mains :-
- before leaving the hedge trimmer unattended for any
period;
- before clearing a blockage;
- before checking, cleaning or working on the
appliance;
- if you hit an object. Do not use your hedge trimmer
until you are sure that the entire hedge trimmer is in a
safe operating condition;
- if the hedge trimmer starts to vibrate abnormally.
Check immediately. Excessive vibration can cause
injury.
- before passing to another person.
Maintenance and storage
1. Keep all nuts, bolts and screws secure to be sure the
hedge trimmer is in safe working condition.
2. Replace worn or damaged parts for safety.
3. Be careful during adjustment of the hedge trimmer to
prevent entrapment of the fingers between moving
blades and fixed parts of the machine.
4. Store in a cool dry place and out of reach of children.
Do not store outdoors.
5. Allow the product to cool for at least 30 minutes
before storing.