Filter
Top Products
Fault Finding Hints
Cutting blade stops under load
1. Cut at a slower pace.
2. Recharge Battery.
3. If cutting blade still stops under load?
Immediately remove the Battery Pack and con-
sult your local approved Service Centre.
Fails to stop when one switch lever is released.
Immediately remove the Battery Pack and con-
sult your local approved Service Centre.
Poor cut quality
1. Ensure the product is being used correctly (see
How to Use)
2. Ensure blades are free from trapped debris
3. Damaged Blades?
Immediately remove the Battery Pack and consult
your local approved Service Centre.
Excessive Vibration
Immediately remove the Battery Pack and consult
your local approved Service Centre.
• Awareness of the environment must be considered
when disposing of ‘end-of-life’ product.
• If necessary, contact your local authority for dis-
posal information.
BATTERY DISPOSAL
• This product contains a NiCd battery and
should not be discarded with normal household
waste at the end of its life.
• The battery must be removed from the product
before disposal
• The battery should be disposed of safely.
• Do NOT dispose of battery to water.
• NiCd batteries can be harmful and should be
disposed of through the recognised recycling
facility in accordance with European Regulation
• Do NOT incinerate
The symbol on the product or on its packag-
ing indicates that this product may not be treated
as household waste. Instead it shall be handed
over to the applicable collection point for the recy-
cling of electrical and electronic equipment.
By ensuring this product is disposed of correctly,
you will help prevent potential negative conse-
quences for the environment and human health,
which could otherwise be caused by inappropri-
ate waste handling of this product.
For more detailed information about recycling of
this product, please contact your local council of-
fice, your household waste disposal service or the
shop where you purchased the product.
If any part is found to be defective due to faulty manu-
facture within the guarantee period, Husqvarna UK
Ltd., through its Authorised Service Repairers will ef-
fect the repair or replacement to the customer free of
charge providing:
(a) The fault is reported directly to the Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or
faulty adjustment by the user.
(d) The failure has not occurred through fair wear and tear.
(e) The machine has not been serviced or repaired,
taken apart or tampered with by any person not
authorised by Husqvarna UK Ltd..
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used outside of the
country for which it was specified.
(i) The machine has not been used commercially.
* This guarantee is additional to, and in no way dimin-
ishes the customers statutory rights.
Failures due to the following are not covered, there-
fore it is important that you read the instructions con-
tained in this Operator's Manual and understand how
to operate and maintain your machine:
Failures not covered by guarantee
* Replacing worn or damaged blades
* Failures as a result of not reporting an initial fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product in ac-
cordance with the instructions and recommenda-
tions contained in this Operator's Manual.
* Machines used for hire are not covered by this guar-
antee.
* The following items listed are considered as wear-
ing parts and their life is dependent on regular
maintenance and are, therefore not normally sub-
ject to a valid warranty claim: Blades.
* Caution!
Husqvarna UK Ltd. does not accept liability under
the warranty for defects caused in whole or part,
directly or indirectly by the fitting of replacement
parts or additional parts that are not either manu-
factured or approved by Husqvarna UK Ltd., or by
the machine having been modified in any way
Guarantee & Guarantee Policy
Environmental Information