5107351-02
Husqvarna Outdoor Products
Aycliffe Industrial Park
NEWTON AYCLIFFE
Co.Durham DL5 6UP
ENGLAND
Telephone - (00) 44 870 609 1901 Fax - (00) 44 870 609 1902
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Aycliffe Industrial Park,
NEWTON AYCLIFFE, Co. Durham. DL5
6UP. Certify that the product:-
Category........ Electric Hover
Make...........Husqvarna OutdoorProducts
Conforms to the specifications of Directive
2000/14/EEC
I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Aycliffe Industrial Park,
NEWTON AYCLIFFE, Co. Durham. DL5 6UP
Certify that a sample of the above product
has been tested using directive 81/1051/EEC
as a guide. The maximum A-weighted sound
pressure level recorded at operator position
under free field semi anechoic chamber condi-
tions was :-
I, the undersigned M. Bowden of
Husqvarna Outdoor Products, Aycliffe
Industrial Park, NEWTON AYCLIFFE, Co.
Durham. DL5 6UP Certify that a sample
of the above product has been tested using
ISO 5349 as a guide. The maximum
weighted root mean square value of vibra-
tion recorded at operator’s hand position
was:-
Type of Cutting Device......Rotary Blade
Identification of Series.......See Product Rating Label
Conformity Assessment Procedure....ANNEX VI
Notified Body.....................Intertek,Cleeve Road,Leatherhead,
Surrey. KT22 7SB England
Other Directives:-...............98/37/EEC, 89/336/EEC, 73/23/EEC
& applicable standards:-....EN61000-3-2, EN61000-3-3,
EN55014-1, EN55014-2, EN836, EN60335-1, EN60335-2-77
Type...........................................................VC350+
Width of Cut................................................35cm
Speed of Rotation of Cutting Device.......4300 RPM
Guaranteed sound power level................91 dB (A)
Measured Sound Power Level.................90 dB (A)
Level........................................................79 dB (A)
Value.........................................................1.2 m/s
2
Weight.......................................................12.5 kg
Newton Aycliffe, 08/02/2006
M. Bowden,
Research & Development Director
EC Declaration of Conformity
Husqvarna Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using,
where practical, components manufactured in the most environmentally responsible manner, according to company
procedures, and with the potential for recycling at the end of the products’ life.
• Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling.
• Awareness of the environment must be considered when disposing of ‘end-of-life’ product.
• If necessary, contact your local authority for disposal information.
The symbol on the product or on its packaging indicates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic
equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the envi-
ronment and human health, which could otherwise be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please contact your local council office, your house-
hold waste disposal service or the shop where you purchased the product.
Environmental Information