Filter
Top Products
Removing and fitting the Blade and Fan
N
blade bolt
blade
fan
spacers
Removing the Blade and Fan
1. To remove the blade bolt, hold the fan firmly and
with the spanner provided loosen the blade bolt by
turning it anti-clockwise (M).
2. Remove the blade bolt, blade, spacers and fan. (M)
3. Inspect for damage and clean as necessary.
• Renew your metal blade after 50 hours mowing
or 2 years whichever is the sooner - regardless
of condition. If the blade is cracked or dam-
aged replace it with a new one. Never use a
blade bolt if the insulated head is damaged
cracked or missing.
Fitting the Blade and Fan
1. Ensure the fan is located correctly.(N)
2. Place the spacers onto the fan ensuring the pegs
have located into the holes.(N)
3. Place the blade onto the spacers ensuring the pegs
have located into the holes on the blade and ensuring
the blades is positioned as illustrated in Figure N
4. Place the blade bolt through the centre hole of the blade.
5. Tighten down clockwise by hand.
6. Hold the fan firmly and tighten the blade bolt with
the spanner provided.
Grassbox Instructions
Using the product with the bag:
The bag with its grass can be disposed of with green
waste and is fully compostable. This means easy, clean
disposal of grass. Do not leave bag in grassbox after use.
Do not use for any other purpose than grass collecting.
For replacement bags or for more information con-
tact our helpline on 01325 300303 or visit our web-
site: www.flymo.com.
Alternatively the product can be used without
the bag,grass will collect in the box.
Grassbox Full (P)
1. As the grassbox fills up, grass will be clearly visi-
ble through the window in the lid (P).
2. When the window is full it is time to empty the grassbox.
Emptying the Grass
• Stop the lawnmower,and wait until the blade has
stopped rotating BEFORE lifting the grassbox lid.
WITH BAG (Q)
1. Lift grassbox lid.
2. Remove bag. Insert new bag if continuing to cut grass.
3. Close grassbox lid carefully.
WITHOUT BAG (R)
1. Lift grassbox lid.
2. Lift out grassbox and empty.
3. Replace grassbox and close lid carefully.
• Failure to fit the grassbox and grassbox lid
correctly will cause poor grass collection.
Ensure there is no grass trapped between the
lid and the hood.
P
Q
R
grassbox
is full
grassbox
is empty
Remove bag
Lift out box
S1 S2
S3
S4
Storing your cable in the Easi-Reel cable winder
1. Insert the female connector into the centre of the
cable winder (S1)
2. Place the cable under the cable guide (S2)
3. Turn the cable winder (S3) until all of the cable is
wound in.(S4)
Unwinding the cable before re-use
1. Pull the cable by the plug and unwind the cable
fully.
• Ensure that the cable is released from the
cable guide (S2) before using your machine.
• Ensure cable is not entangled with any other
cables and that it is not trapped in any parts of
the product.
Easi-Reel Cable Winder