Fluke 271 Portable Generator User Manual


 
271
Getting Started Manual
arbitrary waveforms 01 to 05. These first five store
locations are available for waveforms downloaded from a
PC.
When you press the
ENTER key the output switches to
the selected waveform but the display does not change;
press
ESCAPE to return to the main menu, then press
ARB
and switch the output on to initiate the signal.
Note that there are no facilities for storing waveforms
edited using the instrument itself. However, certain
waveforms, for example waveforms which emulate the
effect of passing sharp edges through low-pass filters, can
be generated without the aid of a computer. There are
some examples described in chapter 15, Application
Examples, of the Users Manual.
Other Functions and Waveforms
The instrument offers a number of additional capabilities
and features which are beyond the scope of this Getting
Started Manual. These include:
Amplitude modulation
Frequency hopping
Phase locking
Noise generation
Synchronizing two or more generators in master-slave
mode
Remote operation through the RS232 and GPIB
interfaces.
These are all covered in detail in the Users Manual.
24