Filter
Top Products
Using The Test Tool
Saving and Recalling a Setup and a Screen
1
33
Recalling Screens and Setups
To recall a screen and setups, do the following:
Open the SAVE/PRINT menu.
Highlight RECALL ...
Open the RECALL ... submenu.
Already filled memory locations
are indicated with a closed
square ().
Highlight memory 7.
View the saved screen and
belonging settings.
Observe that the recalled waveform is displayed and that
HOLD appears on the screen. From this point you can
use cursors for analysis or you can print the recalled
screen. The instrument returns to signal acquisition if you
press the HOLD/RUN key. The settings such as stored in
memory location 7 are used then.