Fluke 124 Telescope User Manual


 
Fluke 123/124
Users Manual
16
Freezing the Screen
You can freeze the screen (all readings and waveforms)
at any time.
Freeze the screen. HOLD
appears at the bottom of the
reading area.
Resume your measurement.
Holding a Stable Reading
The Touch Hold
®
function captures and freezes the next
stable measurement result. A beep indicates that a stable
measurement has been made.
Use the following procedure for the Touch Hold function:
Open the INPUT A menu.
TOUCH HOLD OFF appears on
bottom of the screen.
Measure the signal.
BEEP)))
Wait until an audible beep: now
you have a stable display.
The screen continues to update
with valid readings (and beeps)
as longs as you maintain the
measurement connections.
Because no special keys accompany the Touch Hold
function, you can use this function for hands-free
measurements.
Return to normal measurement.