Filter
Top Products
K3034pr-0920
7
BOTTOM VIEW
9
ASSEMBLY
F
K3034pr-0920
5
IMPORTANT! An electrical connection must be made for your vehicle
to function properly. Please follow these instructions carefully.
• Carefully stand the vehicle on end.
• Reach inside the slot in the underside of the vehicle near the
steering linkage and pull the power button connector out.
• Fit the power button connector into the motor harness connector.
Note: If the power button connector will not plug into the motor
harness connector, turn it over and try again! Do not force the two
connectors together.
BOTTOM VIEW
• Fit the steering column cap onto the end of the steering column
Ạ
.
• Insert a #8 x
3
/
4
" screw through the large opening in the steering column
cap and the hole in the steering column
ạ
. Tighten the screw.
Hint: You may need to adjust the steering column cap to properly fit
the screw.
• Turn the vehicle upright.
End of Steering
Column
Steering Linkage
Steering Column Cap
Rectangular Opening
ạ
Ạ
Power
Button
Connector
Motor
Harness
Connector
6
• Fit the end of the steering column through the hole in the
steering linkage.